Andersen A3 EV Charger Installation in Tunbridge Wells
Request an Andersen A3 installation quote for a Tunbridge Wells home. An independent installer can check the wall, electricity supply, hidden-cable reach and finish choice before preparing a property-specific quotation.
- Hidden 5.5m tethered Type 2 cable
- Customisable front and body finishes
- Smart app and solar charging support
Request a Free Quote
Select your installation type and enter your details below.
When the charger is part of the front elevation
Why Choose an Andersen A3 for a Tunbridge Wells Home?
The Andersen A3 is aimed at homeowners who care about the appearance of equipment fixed to a prominent wall. Its tethered lead is stored within the enclosure, keeping the cable and plug out of view when the charger is not in use.
The premium is mainly about design, material choice and cable concealment rather than faster home charging. That makes it most compelling where the charger is clearly visible and the selected finish genuinely complements the property.
Choose the finish in the actual daylight
Planning the A3 Colour, Front Panel and Mounting Wall
Body colour
Compare the casing against brick, render, stonework, gates and nearby metalwork. Small online swatches can look different on a full outdoor installation.
Front finish
Select the face material or colour for the setting, then ask how it should be cleaned and maintained in an exposed position.
Fixing surface
The wall must support the unit and repeated cable movement. Render, insulation, uneven masonry or a free-standing post may need a specific fixing design.
Hidden does not mean unlimited
Check the 5.5m Cable Before Choosing the Wall
The attached Type 2 lead stores behind the A3 front, which is central to the tidy appearance. Its 5.5m length must still reach the vehicle inlet without being pulled tight. Because the cable is fixed, the mounting position has less room for error than a socketed charger used with different detachable leads.
Park the vehicle normally, then test measurements to front, rear and side charge-port positions. If two electric cars may use the point, include both. Moving the charger after installation is far more disruptive than resolving the position during the survey.
Key A3 facts to place in the quotation
Andersen A3 Technical and Practical Overview
| Charging power | Approximately 3kW to 7.2kW, subject to supply and configuration |
|---|---|
| Vehicle connection | Tethered Type 2 |
| Cable length | 5.5m hidden tethered lead |
| Cable storage | Lead and plug concealed within the enclosure |
| Controls | Andersen app and smart charging functions |
| Security | Remote software locking features |
| Solar | Solar charging support; design depends on property equipment |
| Finish choice | Multiple body and front-panel combinations |
| Installation question | Confirm exact finish codes, protection, monitoring and warranty |
A premium charger needs a detailed written specification
Andersen A3 Installation Cost in Tunbridge Wells
For planning purposes, an Andersen A3 installation may be around £1,400–£1,800. Bespoke finish choices, the mounting arrangement, electrical route and any upgrade work can move the final price outside that range.
Product schedule
Record the exact body colour, front finish, cable type and any selected accessories in the quotation.
Installation schedule
Confirm wall preparation, cable route, protection, load monitoring, testing, certification and making good.
Responsibility
Identify who covers charger faults, finish issues, workmanship, app setup and post-installation support.
Approximate examples at 7.2kW
Andersen A3 Charging Time Guide
| Usable battery | Approximate 0–100% | Energy possible in 4 hours |
|---|---|---|
| 40kWh | About 5 hours 35 minutes | Up to 28.8kWh |
| 60kWh | About 8 hours 20 minutes | Up to 28.8kWh |
| 80kWh | About 11 hours 5 minutes | Up to 28.8kWh |
| 100kWh | About 13 hours 55 minutes | Up to 28.8kWh |
Actual output depends on the configured supply, vehicle AC limit, losses, load management and battery conditions. Most home sessions replace only the previous day’s mileage.
Kerb appeal is part of the decision
A3 Installation on Prominent Tunbridge Wells Properties
Where a charger is visible from the street in areas such as The Park, Broadwater Down, Boyne Park or around Calverley Park, the enclosure can become a permanent part of the property’s appearance. The A3’s finish range and hidden cable can make sense in that setting.
Appearance does not replace electrical planning. The chosen wall must still offer a safe supply route, reliable communications and a 5.5m path to the vehicle inlet. Owners of listed buildings, flats or properties with lease, landlord or estate restrictions should check permissions before work is booked.
Andersen A3 selected on this page
Compare Popular EV Chargers in Tunbridge Wells
The current charger is highlighted and deliberately unlinked. Select any other charger heading to open its dedicated Tunbridge Wells installation guide.
| Feature | Zappi | Hypervolt | Ohme Pro | Ohme ePod | Andersen A3 | Tesla | Easee | Wallbox | EO Mini | Pod Point |
|---|---|---|---|---|---|---|---|---|---|---|
| Maximum home output | 7kW | 7.4kW | 7.4kW | 7.4kW | Up to 7.2kW | Up to 7.4kW | Up to 7.4kW | Up to 7.4kW | Up to 7.2kW | Up to 7kW |
| Cable arrangement | Tethered or socketed | Tethered: 5m, 7.5m or 10m | Tethered: 5m or 8m | Socketed / untethered | Hidden 5.5m tethered cable | Tethered | Socketed / untethered | Tethered | Tethered or socketed | Tethered or socketed |
| Controls | Screen, buttons and app | App and illuminated status ring | LCD screen, buttons and app | Buttons, LED strip and app | App and concealed plug area | App and connector button | App, touch control and LED | App and status halo | App and status indicator | App and status light |
| Solar approach | Dedicated ECO and ECO+ modes | Solar charging supported | Solar-compatible controls | Solar-compatible controls | Solar charging supported | Tesla ecosystem options | Via compatible energy controls | Solar charging features | System-dependent | Not its main emphasis |
| Best suited to | Homes with solar PV | Long drives and smart homes | Tariff-aware charging | Compact, cable-free frontage | Design-led front elevations | Tesla households | A compact wall unit | Compact connected charging | Restricted wall space | Straightforward daily use |
| Indicative installed cost | £1,250–£1,500 | £1,100–£1,350 | £1,050–£1,250 | £1,000–£1,200 | £1,400–£1,800 | £1,000–£1,250 | £1,000–£1,250 | £1,050–£1,300 | £1,000–£1,250 | £1,050–£1,250 |
This is a planning comparison, not a product promise. Specifications, integrations and prices can change. Confirm the exact hardware, current functions, vehicle compatibility and full written installation scope before ordering.
From first enquiry to a written quotation
Arrange a Andersen A3 Installation Assessment
Submitting the form is free and does not commit you to buy. Any installation contract is made directly with the independent company that assesses the property and issues its quotation.
Send the details
Choose residential or commercial and provide the Tunbridge Wells postcode.
Describe the site
Share the car, parking position, consumer unit and preferred charger location.
Review suitability
The installer considers supply capacity, route, protection and load management.
Check the quote
Confirm hardware, electrical work, certification, warranties and final price.
Andersen A3 questions for local properties
Frequently Asked Questions
What makes the Andersen A3 different from other home chargers?
Its main distinction is a design-led enclosure that stores the tethered charging cable and plug out of sight. It also offers a wide choice of body and front-panel finishes.
How long is the Andersen A3 charging cable?
The A3 uses a 5.5m hidden tethered Type 2 cable. Measure the real route to the vehicle inlet before choosing the mounting position.
Is the Andersen A3 tethered or untethered?
It is tethered, but the attached lead is stored within the charger enclosure when it is not being used.
Can the Andersen A3 charge from solar panels?
The A3 supports solar charging. The monitoring and configuration required depend on the property’s solar inverter, electricity flows and any home battery.
Is an Andersen A3 faster than a standard 7kW charger?
No significant speed advantage should be assumed. The A3 is a 7kW-class single-phase home charger; its main benefits concern design, finish and concealed cable storage.
How much does Andersen A3 installation cost in Tunbridge Wells?
A useful planning range is approximately £1,400–£1,800. Finish selection, mounting, cable route and electrical work can alter the final quotation.
Can it be installed on a rendered or insulated wall?
Possibly, but the fixing method must suit the wall construction and the weight and movement of the charger. The installer should assess the surface and specify suitable fixings or an alternative mount.
Do I need permission to install an A3?
Many house installations with private off-street parking are straightforward, but listed status, lease terms, landlord rules, communal areas and planning constraints can change the position. Check the property-specific requirements.
Who is responsible if there is a problem after installation?
The independent company named in the installation contract is responsible for its workmanship, certification and stated aftercare. Product warranty responsibilities should also be confirmed in the written quotation.
Request a Andersen A3 Quote in Tunbridge Wells
Tell us where the charger is required and how the vehicle will be parked. Your enquiry can be introduced to an independent installation company covering Tunbridge Wells.