Pod Point Solo 3 Installation in Pembury
Request a quotation for a Pod Point Solo 3 or current Solo 3S at your Pembury property. Your enquiry can be matched with an independent installer who will assess the electrical supply, WiFi, cable route and preferred tethered or socketed connection.
- Up to 7.4kW home charging
- Tethered or untethered configuration
- App scheduling, solar and power balancing
Request a Free Quote
Select your installation type and enter your details below.
Straightforward connected charging at home
Is a Pod Point Solo 3 Right for Your Pembury Property?
Pod Point’s familiar home charger is now sold as the Solo 3S, the current evolution of the Solo 3. It suits drivers who value uncomplicated 7.4kW charging, app scheduling and a choice between a permanently attached lead and a socketed unit.
Where the Solo 3S Works Well
The charger covers the essentials required for routine overnight charging without making the wall unit needlessly complicated. WiFi supports schedules, charging information and software updates, while Auto Power Balancing helps the installation stay within the available household supply.
- Up to 7.4kW on a suitable 32A circuit
- Tethered and untethered Type 2 options
- Pod Point app charging schedules
- Solar integration for compatible properties
- Automatic household power balancing
When Another Charger May Suit You Better
Pod Point is a sensible all-round choice, but the best charger depends on the vehicle, tariff, solar setup and the level of automation you want. A more specialist alternative may offer deeper energy-tariff control, stronger voice integration or more advanced surplus-solar modes.
- Compare Zappi for solar-led charging control
- Compare Ohme for tariff-focused scheduling
- Compare Hypervolt or Wallbox for smart-home priorities
- Check WiFi strength at the intended outside wall
- Confirm whether cable convenience or a clean socketed look matters most
Pod Point selected on this page
Compare Popular EV Chargers in Pembury
Pod Point is highlighted and deliberately unlinked because you are already viewing its Pembury guide. Select another charger heading to compare its installation, features and likely costs.
| Feature | Zappi | Hypervolt | Ohme Pro | ePod | Andersen A3 | Tesla | Easee | Wallbox | EO Mini | Pod Point |
|---|---|---|---|---|---|---|---|---|---|---|
| Smart App Control | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Solar Compatible | ★★★★★ | ★★★★☆ | ★★★☆☆ | ★★★☆☆ | ★★★★☆ | ★★☆☆☆ | ★★★☆☆ | ★★★★☆ | ★★★☆☆ | ★★☆☆☆ |
| Tethered Available | ✓ | ✓ | ✓ | × | ✓ | ✓ | × | ✓ | ✓ | ✓ |
| Untethered Available | ✓ | × | × | ✓ | × | × | ✓ | ✓ | ✓ | ✓ |
| Smart Connectivity | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Load Balancing | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Voice Assistant Support | × | ✓ | × | × | × | × | × | ✓ | × | × |
| Best For | Solar homes | Smart homes | Tariff users | Budget option | Premium homes | Tesla owners | Compact design | Smart homes | Small spaces | Simplicity |
| Typical Installed Cost | £1,250–£1,500 | £1,100–£1,350 | £1,050–£1,250 | £1,000–£1,200 | £1,400–£1,800 | £1,000–£1,250 | £1,000–£1,250 | £1,050–£1,300 | £1,000–£1,250 | £1,050–£1,250 |
This is an indicative comparison rather than a product guarantee. Charger versions, integrations, vehicle compatibility, accessories and installer prices can change. Confirm the exact unit and written scope before accepting a quotation.
Two ways to connect the vehicle
Choose Tethered Convenience or an Untethered Socket
The current Solo 3S can be ordered with a permanently attached Type 2 lead or a Type 2 socket. The tethered version is quick to use because the cable is always beside the parking space. The current direct product information describes a 6.5-metre attached lead.
The untethered version keeps the wall tidier when the car is away and lets you use a compatible removable cable. It can be practical when different cable lengths may be needed, but the cable must be taken from the vehicle and stored after use.
Current Solo 3S hardware
Pod Point Solo 3S Specifications
The current UK home model is a 7kW-class smart charger rated for up to 32A on a suitable 240V single-phase supply. The weather-resistant enclosure is designed for outside use and the Type 2 connection suits most modern UK and European electric cars and plug-in hybrids.
Published Solo 3S documentation lists WiFi connectivity, over-the-air feature and software updates, Auto Power Balancing, an IP54 enclosure and IK10 impact rating. The socketed model is deeper than the tethered enclosure because of its front socket assembly.
The Solo range has changed over time. Hardware, cable length, colour, software functions, warranty and installation contents should be checked against the exact model named in the installer’s quotation.
| Home charging output | Up to 7.4kW |
|---|---|
| Maximum current | 32A |
| Electrical supply | 240V, 50Hz, single phase |
| Vehicle connection | Tethered or socketed Type 2 |
| Current tethered cable | 6.5m, confirm exact model |
| Connectivity | WiFi 802.11 b/g/n |
| Power management | Auto Power Balancing |
| Protection ratings | IP54 and IK10 |
| Approximate size | 330 × 290 × 112mm tethered |
| Standard warranty | 3 years, subject to terms |
Understanding the product name
Solo 3 and Solo 3S: What Does the Name Mean?
Homeowners often search for “Pod Point Solo 3”, while Pod’s current product is presented as the Solo 3S. Keeping those names clear helps prevent an older specification from being mistaken for the charger actually being supplied.
The Familiar Solo 3 Name
Solo 3 is widely recognised from earlier installations, product listings and customer searches. Older units and documents may have different cable, power or connectivity details from the current model.
The Current Solo 3S
Solo 3S is the present evolution aimed at straightforward 7.4kW home charging. Current choices include tethered and socketed Type 2 versions, app control, solar integration and Auto Power Balancing.
Check the Written Quotation
The quotation should state the precise product name, connector style, cable length, colour, included electrical work and warranty. Do not rely on “Solo 3” as a catch-all description.
Indicative Pod Point pricing
Pod Point Solo 3 Installation Cost in Pembury
A useful local guide is approximately £1,050–£1,250 for a straightforward domestic installation. The total can move outside that range because the charger, cable route and electrical condition are different at every property.
Typical Guide Range
£1,050–£1,250Ask whether the figure includes the current Solo 3S, installation labour, dedicated circuit, protection, commissioning, testing, notification and certification.
What May Increase the Price?
Long cable runs, trenching, consumer-unit changes, difficult wall access, remedial earthing, additional surge protection or work needed near the meter can add cost.
Possible Grant Support
Eligibility can exist for some renters, flat owners, landlords and workplace installations. Read the current conditions on our EV charger grants page before relying on funding.
Approximate charging at 7.4kW
Pod Point Solo 3S Charging-Time Estimates
The figures below divide battery capacity by a continuous 7.4kW supply. Real charging is affected by losses, battery temperature, the car’s onboard AC limit and any power management. Most drivers recharge only the energy used that day rather than filling an empty battery.
| Usable battery capacity | Approximate 0–100% at 7.4kW | Possible energy in four hours |
|---|---|---|
| 40kWh | About 5 hours 25 minutes | Up to 29.6kWh |
| 60kWh | About 8 hours 10 minutes | Up to 29.6kWh |
| 80kWh | About 10 hours 50 minutes | Up to 29.6kWh |
| 100kWh | About 13 hours 30 minutes | Up to 29.6kWh |
A vehicle limited to 3.6kW AC will charge more slowly even when connected to a 7.4kW Solo 3S. The same applies when Auto Power Balancing temporarily reduces charger demand to protect the household supply.
Scheduling, updates and household demand
Pod Point App, WiFi and Auto Power Balancing
The Pod Point app can be used to create charging schedules and review supported charging information. Scheduling can help move routine charging into a preferred overnight period, although the vehicle’s own settings and the electricity tariff still need to be coordinated to avoid conflicting timers.
A WiFi connection gives the Solo 3S access to connected services and over-the-air software updates. Pod Point guidance indicates that the charger can fall back to charging if WiFi is lost while it is waiting, while a scheduled session already in progress should continue. That behaviour protects mobility, but it may mean electricity is used outside the planned cheap period until the connection is restored.
Auto Power Balancing monitors demand and adjusts EV charging so the property does not exceed its available electrical capacity. The survey must still confirm the supply, main fuse, sensors and installation design needed for the feature to work correctly.
A design based on the actual property
Planning a Pod Point Installation in Pembury
A good quotation accounts for the parking position, cable reach, electrical route and network signal rather than treating every home as a standard job.
Parking and Cable Use
The tethered lead should reach the car inlet without being stretched, trapped by a door or placed across a public footway. For an untethered unit, decide where the removable cable will be stored.
Electrical Assessment
The installer should inspect the main fuse, meter area, consumer unit, earthing and existing demand. The dedicated circuit and protection must be designed for the property and current standards.
Local Property Layout
Compact frontage near Pembury High Street can create different routing challenges from longer drives around Henwood Green Road, Lower Green Road or Romford Road. Photographs and measurements help make the first price more realistic.
From enquiry to written quotation
Arrange a Pod Point Solo 3 Installation Quote
Submitting the form is free and does not commit you to installation. The independent company should verify the exact Solo model, electrical design, installation contents, total cost and its own warranty responsibilities.
Send Your Details
Select residential or commercial and provide the Pembury postcode.
Choose the Format
Indicate whether you prefer a tethered lead or socketed charger.
Review the Property
Supply, route, parking, WiFi and solar requirements are assessed.
Check the Quote
Confirm the hardware, scope, certification, price and aftercare.
Pod Point questions from Pembury drivers
Frequently Asked Questions
What is the difference between Pod Point Solo 3 and Solo 3S?
Solo 3 is the familiar earlier product name, while Solo 3S is the current evolution sold for home charging. Specifications have changed across versions, so the quotation should identify the exact charger, connector, cable length and warranty being supplied.
Should I choose a tethered or untethered Solo 3S?
Choose tethered if you want a Type 2 lead permanently ready beside the car. Choose untethered if you prefer a tidier wall and are happy to connect and store your own compatible cable. Parking position and cable reach should guide the decision.
How long is the tethered Pod Point cable?
Current Solo 3S product information describes a 6.5-metre attached Type 2 cable. Earlier documentation and previous Solo versions can differ, so confirm the precise lead length on the model named in the written quotation.
Does a Pod Point Solo 3S need WiFi?
WiFi supports app-connected services, charging schedules and over-the-air updates. The signal should be tested at the outside wall before installation, with a compatible 2.4GHz network available if required by the unit.
What happens if the Pod Point loses WiFi?
Pod Point guidance indicates that a charger waiting for a scheduled session can fall back to charging if WiFi is lost, while a scheduled charge already under way should continue. Restore the connection promptly because the fallback may not follow the intended low-cost period.
Can the Pod Point Solo 3S work with solar panels?
Yes, the current Solo 3S is promoted with solar integration. Actual surplus use depends on the solar, metering, household load and charger setup. Ask the installer to explain the supported behaviour and any additional monitoring equipment.
Does the Solo 3S include load balancing?
It supports Auto Power Balancing, which can adjust EV charging in response to household electricity demand. The installation survey must establish the available supply and the equipment needed to commission this correctly.
How much does Pod Point Solo 3 installation cost in Pembury?
A typical guide is approximately £1,050–£1,250 for a straightforward domestic installation. The precise charger version, cable distance, consumer-unit work, protection, trenching, access and remedial electrical work can alter the total.
Who carries out the Pod Point installation?
EVChargersTunbridgeWells.co.uk is an independent lead-generation service and is not affiliated with Pod Point. It does not install chargers. The independent installation company is responsible for assessment, quotation, contract, workmanship, certification, warranties and aftercare.
Residential and commercial enquiries
Request a Pod Point Solo 3 Quote in Pembury
Tell us about the vehicle, parking arrangement and electrical supply. Your enquiry can be introduced to an independent EV charger installation company covering Pembury.
Return to the Quote FormCall 07780 900260Pod Point, Pod and Solo are trademarks of their respective owner. EVChargersTunbridgeWells.co.uk is an independent lead-generation service and is not affiliated with or endorsed by Pod Point.
We are an independent service that connects customers with EV charger installation specialists.