EO Mini Pro 3 Installation in Pembury
Request a quotation for an EO Mini Pro 3 installation at your Pembury property. An independent installer can assess the electrical supply, cable route, preferred tethered or socket connection, connectivity and CT-clamp requirements for solar charging or power balancing.
- Up to 7.2kW or 22kW charging
- Tethered or socket Type 2 options
- ev.energy app, solar and power balancing
Request a Free Quote
Select your installation type and enter your details below.
A5-sized smart charging for a Pembury property
Is an EO Mini Pro 3 Right for Your Home?
The EO Mini Pro 3 is designed for drivers who want a discreet wall charger with more connection choices than its small enclosure suggests. It is available with a fixed Type 2 lead or locking socket, supports home energy management and now connects to the ev.energy smart-charging platform.
Why the Mini Pro 3 Appeals
At approximately the size of an A5 notepad, the charger can fit narrow walls and compact parking areas. Single-phase homes can charge at up to 7.2kW, while a suitable three-phase version can provide up to 22kW where both supply and vehicle permit.
- Compact 230 × 151 × 125mm enclosure
- Tethered or socketed Type 2 connection
- WiFi, Ethernet and Bluetooth as standard
- Solar charging and power balancing
- ev.energy app scheduling and insights
Points to Confirm in the Quotation
The tethered model is limited to a 5m fixed lead. Longer 7.5m or 10m cable options require the socketed charger and a separate removable cable. Built-in open-PEN protection applies to the single-phase version, not every three-phase installation.
- Choose the connector around the parking layout
- Confirm 7.2kW or three-phase hardware
- List every CT clamp included in the package
- Decide whether wired Ethernet is practical
- Use an EO-approved installer for warranty cover
EO Mini selected on this page
Compare Popular EV Chargers in Pembury
EO Mini is highlighted and deliberately unlinked because this is its Pembury guide. Select another charger heading to compare its features, likely installation cost and suitability.
| Feature | Zappi | Hypervolt | Ohme Pro | ePod | Andersen A3 | Tesla | Easee | Wallbox | EO Mini | Pod Point |
|---|---|---|---|---|---|---|---|---|---|---|
| Smart App Control | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Solar Compatible | ★★★★★ | ★★★★☆ | ★★★☆☆ | ★★★☆☆ | ★★★★☆ | ★★☆☆☆ | ★★★☆☆ | ★★★★☆ | ★★★☆☆ | ★★☆☆☆ |
| Tethered Available | ✓ | ✓ | ✓ | × | ✓ | ✓ | × | ✓ | ✓ | ✓ |
| Untethered Available | ✓ | × | × | ✓ | × | × | ✓ | ✓ | ✓ | ✓ |
| Smart Connectivity | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Load Balancing | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Voice Assistant Support | × | ✓ | × | × | × | × | × | ✓ | × | × |
| Best For | Solar homes | Smart homes | Tariff users | Budget option | Premium homes | Tesla owners | Compact design | Smart homes | Small spaces | Simplicity |
| Typical Installed Cost | £1,250–£1,500 | £1,100–£1,350 | £1,050–£1,250 | £1,000–£1,200 | £1,400–£1,800 | £1,000–£1,250 | £1,000–£1,250 | £1,050–£1,300 | £1,000–£1,250 | £1,050–£1,250 |
This table is an indicative guide. Product revisions, integrations, accessories, vehicle limits and installer pricing can change, so confirm the exact hardware and written installation scope.
A fixed 5m lead or removable cable
Choose Tethered Convenience or a Locking Socket
The tethered Mini Pro 3 includes a fixed 5m Type 2 cable. It is quick to connect after parking and includes a holster for storing the plug, but the charger must be positioned so five metres reaches the normal vehicle inlet without strain.
The socketed version keeps the wall clear when charging is finished. EO offers compatible removable leads in 5m, 7.5m and 10m lengths, making it the more flexible choice for a longer or changing parking arrangement.
Small enclosure, substantial connectivity
EO Mini Pro 3 Specifications
The current home range provides up to 7.2kW on a 230V single-phase supply, with a three-phase version capable of up to 22kW. Output is adjustable from 6A to the installed limit, and the car’s onboard charger may accept less than the wall unit can provide.
WiFi, Cat 5 Ethernet and Bluetooth are standard connection methods; 4G cellular is an optional extra. The socketed enclosure is IP54 rated, while the tethered version is IP56. Both are listed with IK08 impact resistance and operate from -25°C to 50°C.
The quotation should identify the power version, connector, network hardware, CT clamps and UK protection features. Built-in open-PEN protection is specified for the single-phase charger.
| Single-phase output | Up to 7.2kW at 32A |
|---|---|
| Three-phase output | Up to 22kW |
| Connection | Type 2 tethered or locking socket |
| Tethered cable | Fixed 5m |
| Dimensions | 230 × 151 × 125mm |
| Connectivity | WiFi, Ethernet and Bluetooth |
| Optional connection | 4G cellular |
| Protection ratings | IP56 tethered; IP54 socket; IK08 |
| DC leakage detection | Integral 6mA RDC-DD |
| Standard warranty | 3 years, subject to EO terms |
The current smart-charging platform
EO Mini Pro 3 and the ev.energy App
EO announced that Mini Pro 3 customers would transition to the ev.energy app from summer 2025. New installations should therefore be commissioned against the current ev.energy service rather than being set up around outdated EO app instructions.
The platform offers automatic off-peak charging, tailored schedules, real-time energy insights and rewards for charging at cleaner grid times. Solar integration can also be managed through the supported setup. Drivers with an older Mini Pro 3 may need their charger migrated and its OCPP connection updated before it appears correctly in the app.
App availability depends on the charger maintaining a suitable network route. The installer should complete account pairing, confirm the correct back-office connection and demonstrate a scheduled session before leaving.
Managing demand and renewable generation
Power Balancing and Solar Charging
The Mini Pro 3 can adjust vehicle charging in response to the electricity available at the property. Local automatic load management uses a CT clamp to measure demand, helping the charger avoid exceeding the configured household limit when appliances are drawing more power.
Solar charging also relies on CT measurement. EO’s current home page promotes CT clamps as included as standard, while earlier product sheets described additional clamps as optional. The quotation should settle this by listing the exact clamps, cabling and commissioning included with the supplied package.
Solar matching may combine generation with grid electricity when sunshine is insufficient. Ask the installer how the selected mode behaves, what minimum power the vehicle accepts and whether a home battery changes the measurement arrangement.
Indicative local pricing
EO Mini Pro 3 Installation Cost in Pembury
A typical installed price is approximately £1,000–£1,250 for a straightforward single-phase domestic job. The total depends on connector choice, cable reach, electrical route, network work and the energy-management package.
Typical Guide Range
£1,000–£1,250Check that the quotation includes the Mini Pro 3, electrical circuit, protection, commissioning, testing, notification and certification.
Possible Additional Costs
A removable cable, post, long supply run, trenching, consumer-unit work, extra CT clamps, 4G module or three-phase design may increase the price.
Grant Eligibility
Some renters, flat owners, landlords and workplaces may qualify under current schemes. Read our EV charger grants page and confirm that both hardware and installer meet the rules.
Approximate charging at 7.2kW
EO Mini Pro 3 Charging-Time Estimates
The table divides usable battery size by a continuous 7.2kW supply. Real sessions take longer because of charging losses, battery temperature, vehicle limits and power balancing. Most home charging replaces only the energy used that day.
| Usable battery capacity | Approximate 0–100% at 7.2kW | Possible energy in four hours |
|---|---|---|
| 40kWh | About 5 hours 35 minutes | Up to 28.8kWh |
| 60kWh | About 8 hours 20 minutes | Up to 28.8kWh |
| 80kWh | About 11 hours 10 minutes | Up to 28.8kWh |
| 100kWh | About 13 hours 55 minutes | Up to 28.8kWh |
A 22kW version is faster only where the property has suitable three-phase power and the vehicle can accept 22kW AC. Many cars impose a lower limit.
Three standard routes and one optional backup
WiFi, Ethernet, Bluetooth and 4G Connectivity
WiFi is convenient where the router signal reaches the parking space, while Cat 5 Ethernet can provide a stable wired connection when a practical data-cable route exists. Bluetooth supports short-range setup and local communication.
An optional 4G cellular module can provide another route for properties where fixed connectivity is unreliable. It should not be assumed to be included in the base price, and network coverage at the charger position still needs checking.
Connectivity faults that require an engineer visit may not be covered by the hardware warranty. Testing the selected connection and app pairing during handover is therefore important, particularly after the move to ev.energy.
The warranty depends on installer status
EO-Approved Installation and Three-Year Warranty
EO’s published UK warranty provides three years of standard cover, subject to its conditions. EO also states that the Mini Pro 3 must be installed by an EO-approved installer for warranty protection. General electrical competence alone should not be assumed to satisfy that product condition.
Ask the company to confirm EO approval before accepting the quotation and retain the proof of purchase, serial number, installation certificate and registration. Product cover is separate from the installer’s responsibility for its workmanship and electrical design.
The upstream protection, 6mA DC leakage detection, open-PEN arrangement and commissioning must match the exact unit and installation. The electrician is responsible for applying current UK requirements rather than relying on a generic package description.
Surveying the actual property
Planning an EO Mini Pro 3 Installation in Pembury
The small enclosure helps where wall space is limited, but safe cable reach, electrical capacity and network access still determine the best position.
Parking and Cable Choice
Position a tethered model so the fixed 5m lead reaches the inlet without strain. Select the socketed unit if the layout needs a 7.5m or 10m removable cable.
Electrical Assessment
The survey should cover the main fuse, meter area, consumer unit, earthing, existing load and CT-clamp positions. Three-phase claims must be verified at the property.
Local Property Layout
Compact frontage near Pembury High Street can differ from longer drives around Lower Green Road, Henwood Green Road or Romford Road. Photographs and measurements improve the first estimate.
From enquiry to written quotation
Arrange an EO Mini Pro 3 Installation Quote
Submitting an enquiry is free and does not commit you to proceed. The independent installer should confirm EO approval, the exact hardware, electrical work, app setup, warranty responsibilities and total cost.
Send the Postcode
Select residential or commercial and provide your Pembury details.
Choose the Connection
State tethered or socket and the cable reach required.
Assess the Property
Supply, route, network, CT clamps and solar are reviewed.
Check the Quote
Confirm approval, hardware, certification, warranty and price.
EO questions from Pembury drivers
Frequently Asked Questions
Which app does the EO Mini Pro 3 use now?
EO Mini Pro 3 customers moved to the ev.energy app from summer 2025. New installations should be commissioned for the current platform. An older charger may require migration and an updated OCPP connection.
What charging speed does the EO Mini Pro 3 provide?
The single-phase version provides up to 7.2kW at 32A. EO also lists a three-phase version up to 22kW. The property supply, installation limit and vehicle’s onboard charger determine the actual speed.
Is the EO Mini Pro 3 tethered or untethered?
Both formats are available. The tethered unit has a fixed 5m Type 2 cable. The untethered version has a locking Type 2 socket and uses a separate removable cable.
Can I use a cable longer than five metres?
Not on the tethered model, which is limited to its fixed 5m lead. EO recommends the socketed Mini Pro 3 with a compatible 5m, 7.5m or 10m removable cable when additional reach is needed.
Can the EO Mini Pro 3 charge from solar panels?
Yes. Solar matching uses CT-clamp measurement and can supplement generation with grid electricity when needed. Confirm exactly which clamps, cabling and solar commissioning are included in the quotation.
Does the EO Mini Pro 3 provide load balancing?
Yes. Built-in power balancing can operate through supported OCPP control or locally using a CT clamp. The installer should specify the measurement equipment and configured property limit.
Must I use an EO-approved installer?
EO states that an EO-approved installer is required for Mini Pro 3 warranty cover. Ask the installation company to confirm its status before proceeding and register the unit after installation.
How much does EO Mini Pro 3 installation cost in Pembury?
A typical guide is approximately £1,000–£1,250 for a straightforward single-phase domestic job. Cable choice, route, post, 4G, CT clamps, electrical changes and three-phase work can alter the total.
Who carries out the EO charger installation?
EVChargersTunbridgeWells.co.uk is an independent lead-generation service and is not affiliated with EO Charging or ev.energy. It does not install chargers. The independent installation company is responsible for assessment, quotation, contract, workmanship, certification, warranties and aftercare.
Residential and commercial enquiries
Request an EO Mini Pro 3 Quote in Pembury
Tell us about the vehicle, parking position and electrical supply. Your enquiry can be introduced to an independent EV charger installation company covering Pembury.
Return to the Quote FormCall 07780 900260EO, EO Mini Pro 3 and ev.energy are trademarks of their respective owners. EVChargersTunbridgeWells.co.uk is an independent lead-generation service and is not affiliated with or endorsed by EO Charging or ev.energy.
We are an independent service that connects customers with EV charger installation specialists.