Wallbox Pulsar Max Installation in Pembury
Request a quotation for a Wallbox Pulsar Max installation at your Pembury property. An independent installer can assess the electrical supply, cable route, preferred tethered or socket connection and any power meter needed for solar charging or dynamic load management.
- Up to 7.4kW or 22kW charging
- Tethered or socket Type 2 options
- App, solar and load-management features
Request a Free Quote
Select your installation type and enter your details below.
Connected home charging with flexible hardware
Is a Wallbox Pulsar Max Right for Your Pembury Home?
Pulsar Max suits drivers who want a compact charger without giving up the choice between a permanently attached lead and a socketed wall unit. It combines Wallbox app control with optional solar charging and dynamic household load management.
Where Pulsar Max Stands Out
The current range covers 7.4kW single-phase, 11kW three-phase and 22kW three-phase installations. Tethered versions use a 5m or 7m Type 2 lead, while the shuttered socket version lets the driver select and remove a compatible cable.
- Tethered or socket Type 2 connection
- Wallbox app scheduling and session data
- WiFi and Bluetooth connectivity
- Solar charging with a suitable power meter
- Dynamic load management as an option
Details to Confirm Before Ordering
The power meter needed for solar and dynamic load management is not part of the basic charger specification. Three-phase hardware also does not guarantee faster charging unless the property supply and vehicle’s onboard AC charger support it.
- Choose tethered or socket before the quotation
- Check whether 5m or 7m cable reach is needed
- Confirm single-phase or three-phase hardware
- Identify the power meter and installation cost
- Verify UK O-PEN protection on the supplied variant
Wallbox selected on this page
Compare Popular EV Chargers in Pembury
Wallbox is highlighted and deliberately unlinked because you are viewing the Pulsar Max guide. Select another charger heading to compare its installation, features and typical price.
| Feature | Zappi | Hypervolt | Ohme Pro | ePod | Andersen A3 | Tesla | Easee | Wallbox | EO Mini | Pod Point |
|---|---|---|---|---|---|---|---|---|---|---|
| Smart App Control | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Solar Compatible | ★★★★★ | ★★★★☆ | ★★★☆☆ | ★★★☆☆ | ★★★★☆ | ★★☆☆☆ | ★★★☆☆ | ★★★★☆ | ★★★☆☆ | ★★☆☆☆ |
| Tethered Available | ✓ | ✓ | ✓ | × | ✓ | ✓ | × | ✓ | ✓ | ✓ |
| Untethered Available | ✓ | × | × | ✓ | × | × | ✓ | ✓ | ✓ | ✓ |
| Smart Connectivity | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Load Balancing | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Voice Assistant Support | × | ✓ | × | × | × | × | × | ✓ | × | × |
| Best For | Solar homes | Smart homes | Tariff users | Budget option | Premium homes | Tesla owners | Compact design | Smart homes | Small spaces | Simplicity |
| Typical Installed Cost | £1,250–£1,500 | £1,100–£1,350 | £1,050–£1,250 | £1,000–£1,200 | £1,400–£1,800 | £1,000–£1,250 | £1,000–£1,250 | £1,050–£1,300 | £1,000–£1,250 | £1,050–£1,250 |
This comparison is indicative. Product revisions, integrations, accessories, vehicle limitations and installer prices can change. Confirm the selected hardware and complete written scope.
Convenience or a cleaner wall
Choose a Tethered Cable or Shuttered Socket
The tethered Pulsar Max keeps a Type 2 lead ready beside the vehicle. Current datasheets list 5m and 7m versions, making cable length an important choice where the charger cannot be mounted close to the normal inlet position.
The socket model removes the loose lead from the wall when the car is away. It gives more cable-length flexibility and can suit shared use, although the driver must supply, connect and store a compatible cable. Wallbox also allows a cable to be locked temporarily to the socket.
Current Pulsar Max hardware
Wallbox Pulsar Max Specifications
A standard UK single-phase property will normally use the 7.4kW, 32A version. Where a suitable three-phase supply exists, Pulsar Max is available as 11kW at 16A per phase or 22kW at 32A per phase. The vehicle’s onboard charger determines how much AC power it can accept.
Both enclosure formats use WiFi and Bluetooth for app communication. The current technical data lists IP55 weather protection, IK10 impact resistance, adjustable current from 6A and UK Smart Charging Regulations compliance.
Hardware varies by power, connector, cable and UK protection code. The quotation should give the complete part number and state whether the supplied version includes UK O-PEN protection.
| Single-phase output | Up to 7.4kW at 32A |
|---|---|
| Three-phase output | 11kW at 16A or 22kW at 32A |
| Connection | Type 2 tethered or shuttered socket |
| Tethered cable | 5m or 7m |
| Tethered dimensions | 198 × 201 × 99mm |
| Socket dimensions | 204.3 × 313 × 142.5mm |
| Connectivity | WiFi and Bluetooth |
| Protection ratings | IP55 and IK10 |
| Optional energy features | Dynamic load management and solar |
| Current warranty | 5 years, subject to purchase date and terms |
Energy control requires the right meter
Dynamic Load Management and Solar Charging
Static load management is included in the current Pulsar Max specification. For the charger to respond to changing electricity use across the home, Wallbox Dynamic Load Management requires an external compatible power meter.
When household demand rises, dynamic management can reduce EV charging to remain within the configured property limit. When demand falls, the charger can use more of the available capacity. This may avoid unnecessary supply upgrades, but it does not remove the need for a proper electrical survey.
The same meter enables Wallbox solar charging. The app can be configured to use available surplus only or a mixture of solar and grid energy. Current three-phase solar optimisation differs between connector versions, so the installer should confirm the exact capability of the proposed tethered or socket model.
Indicative local pricing
Wallbox Pulsar Max Installation Cost in Pembury
A typical installed price is approximately £1,050–£1,300 for a straightforward single-phase domestic installation. Connector format, cable length, hardware source and optional energy-management equipment affect the final total.
Typical Guide Range
£1,050–£1,300Confirm whether the figure includes Pulsar Max hardware, electrical protection, installation, commissioning, testing, notification and certification.
Possible Additional Costs
A 7m lead, socket cable, long supply route, trenching, consumer-unit changes, three-phase work or power meter can increase the price.
Grant Eligibility
Some renters, flat owners, landlords and workplaces may qualify under current schemes. Review the conditions on our EV charger grants page before relying on funding.
Approximate charging on a 7.4kW circuit
Pulsar Max Charging-Time Estimates
These examples assume a continuous 7.4kW supply and show theoretical empty-to-full times. Charging losses, battery temperature, vehicle limits and dynamic power control increase real durations. Normal overnight sessions usually replace only the energy used that day.
| Usable battery capacity | Approximate 0–100% at 7.4kW | Possible energy in four hours |
|---|---|---|
| 40kWh | About 5 hours 25 minutes | Up to 29.6kWh |
| 60kWh | About 8 hours 10 minutes | Up to 29.6kWh |
| 80kWh | About 10 hours 50 minutes | Up to 29.6kWh |
| 100kWh | About 13 hours 30 minutes | Up to 29.6kWh |
An 11kW or 22kW charger is faster only when the property has suitable three-phase power and the car supports that AC rate. Many vehicles accept a lower maximum.
Remote control and local connection
Wallbox App, WiFi, Bluetooth and Auto-Lock
The Wallbox app allows the owner to create charging schedules, start or pause sessions, review charging data and manage the charger’s automatic lock. Schedules can place routine charging into an off-peak tariff window, but any timer in the vehicle should be coordinated to avoid one system waiting for the other.
WiFi supports remote access, while Bluetooth provides a local connection when the phone is close to the charger. The installation survey should test WiFi at the intended wall, especially where thick masonry, distance or foil-backed insulation separates the charger from the router.
Wallbox has also promoted Alexa and Google Assistant voice integrations for Pulsar Max. Availability can depend on the current service, app region and account configuration, so voice control should be treated as a convenience to verify rather than the basis of the purchase.
Choosing the correct power version
Single-Phase or Three-Phase Pulsar Max?
Most Pembury houses have single-phase electricity and will be quoted for the 7.4kW model. This is usually sufficient for overnight charging because even a large daily journey can be replenished during the hours the car is parked.
A three-phase supply may make 11kW or 22kW possible, but the upgrade case should be based on real vehicle and usage needs. A car limited to 11kW cannot draw 22kW, while another model may accept only 7.4kW regardless of the wall charger.
For commercial or multi-vehicle charging, the installer should consider the combined site demand, simultaneous-use pattern, access and future expansion. A home-style charger quotation is not a substitute for a scalable commercial design.
Surveying the actual property
Planning a Pulsar Max Installation in Pembury
A reliable quotation accounts for the normal parking direction, charger position, electrical route and connectivity rather than treating every property as a standard job.
Parking and Cable Safety
The lead should reach the vehicle inlet without being stretched, trapped or driven over. It must stay on private land and should not create a trip hazard across a doorway or public pavement.
Electrical Assessment
The installer should inspect the main fuse, meter area, consumer unit, earthing and existing demand. Cable size and protection must be designed for the actual route and charger output.
Local Property Layout
Compact frontage near Pembury High Street may need a different design from longer drives around Lower Green Road, Henwood Green Road or Romford Road. Clear photographs and measurements improve the first estimate.
From enquiry to written quotation
Arrange a Wallbox Pulsar Max Installation Quote
Submitting an enquiry is free and does not commit you to proceed. The independent installer should confirm the exact charger, connection, electrical scope, accessories, certification, warranty responsibilities and total price.
Send the Postcode
Select residential or commercial and provide your Pembury details.
Choose the Charger
State tethered or socket, cable length and expected charging speed.
Assess the Property
Supply, route, parking, WiFi and energy features are reviewed.
Check the Quote
Confirm hardware, meter, protection, certification and total cost.
Wallbox questions from Pembury drivers
Frequently Asked Questions
Is Pulsar Max available tethered and untethered?
Yes. Current Pulsar Max documentation lists Type 2 tethered versions with 5m or 7m cables and a shuttered socket version. The socket cable is normally removable but can be locked temporarily.
What charging speed can Pulsar Max provide?
Available versions provide up to 7.4kW on single phase, 11kW at 16A three phase or 22kW at 32A three phase. The property supply and vehicle’s onboard charger determine the usable speed.
Does Pulsar Max require WiFi?
Basic charging can operate without continuous remote access, but WiFi is needed for convenient remote app control and connected functions. Bluetooth provides local communication when the phone is near the charger.
Can Pulsar Max charge from solar panels?
Yes. Wallbox solar charging can use surplus-only energy or combine solar and grid power. A compatible external Wallbox power meter is required, and three-phase optimisation support should be confirmed for the selected connector version.
Does Pulsar Max include dynamic load management?
Static load management is included, while dynamic household load management requires an external compatible power meter. Ask the installer to identify the meter and its installation separately in the quotation.
Does Pulsar Max work with Alexa or Google Assistant?
Wallbox has promoted support for Amazon Alexa and Google Assistant integrations. Current availability can depend on the app, account and region, so the desired command should be checked before purchase.
What warranty applies to Pulsar Max?
Wallbox currently states five years from the original purchase date, subject to its terms. Products purchased from 1 January 2022 to 1 October 2025 had a three-year period, and third-party vendor terms may differ.
How much does Pulsar Max installation cost in Pembury?
A typical guide is approximately £1,050–£1,300 for a straightforward single-phase domestic installation. Cable length, socket lead, route, electrical upgrades, power meter, solar and three-phase work can change the price.
Who carries out the Wallbox installation?
EVChargersTunbridgeWells.co.uk is an independent lead-generation service and is not affiliated with Wallbox. It does not install chargers. The independent installation company is responsible for assessment, quotation, contract, workmanship, certification, warranties and aftercare.
Residential and commercial enquiries
Request a Wallbox Pulsar Max Quote in Pembury
Tell us about the vehicle, property supply and preferred charger format. Your enquiry can be introduced to an independent EV charger installation company covering Pembury.
Return to the Quote FormCall 07780 900260Wallbox and Pulsar Max are trademarks of their respective owner. EVChargersTunbridgeWells.co.uk is an independent lead-generation service and is not affiliated with or endorsed by Wallbox.
We are an independent service that connects customers with EV charger installation specialists.